LYSAGHT MINI ORB®

by BLUESCOPE LYSAGHT

LYSAGHT MINI ORB® is a mini-corrugated profile which is suitable for use in interior or exterior applications on straight or curved surfaces. It has the same traditional shape as LYSAGHT CUSTOM ORB® but on a much reduced scale.  Its subtle profile is a perfect complement to other LYSAGHT® claddings to provide a "contrasting" surface as an accent feature. It is primarily used for decorative finishes on walls, ceilings and soffit linings; feature walls and partitions; and screens and small awnings not subject to any foot traffic.

  •  Able to be used for both straight and curved applications
  • Can be used with the corrugations running vertically or horizontally
  • Can be laid flat, pre-curved, or spring-curved for increased versatility
  • Available in a wide variety of COLORBOND® steel colours and ZINCALUME® steel
  • LYSAGHT MINI ORB® is only suitable in for use for walling in non-cyclonic areas

Lengths

Sheets are supplied custom cut.

Tolerances

Length: +5mm, -5mm
Width: +2mm, -2mm

Material Specification

  • ZINCALUME® steel made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass)
  • COLORBOND® prepainted steel complying with AS/NZS 2728:Type 4, is made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass) or AZ200 (200g/m2 minimum coating mass), or
  • COLORBOND® prepainted steel complying with AS/NZS 2728:Type 6, is made from stainless steel complying with JIS G 4305, Grade 430 stainless steel, 430SS550. Subject to enquiry, or
  • The base metal thickness is 0.42mm  (0.48mm BMT available subject to enquiry)


Curving information

LYSAGHT MINI ORB® Curving Requirements MINI ORB® may be spring curved down to 1500mm radius. It is suitable for pre-curving - the minimum radius of curve is 150mm, and the minimum straight length after a curve is 50mm. Some possible profiles are shown on the left.


Mass - COLORBOND® steel

BMT 0.42mm: 4.04kg/m2
BMT 0.48mm: 4.58kg/m2