NEETALOK® Fencing - Western Australia
by BLUESCOPE LYSAGHT
The modular LYSAGHT NEETALOK® fence is one of the most versatile and durable fencing systems you can buy. The COLORBOND® prepainted steel finish with vertical ribbed LYSAGHT TRIMDEK® panels provide strength and simple assembly.
LYSAGHT NEETALOK® fences are specifically designed not to fly apart during a cyclone. This means they are much safer than standard fences. However, cyclonic wind conditions can be so extreme that LYSAGHT NEETALOK® fences cannot be guaranteed to survive a cyclone.
- Posts, rails and panel colours can be mixed and matched for attractive combinations
- Total component system means quick and simple installation
- Termite and rot resistant
- May be stepped or raked on sloping ground
- Cyclonic wind conditions can be so extreme that LYSAGHT NEETALOK® fences cannot be guaranteed to survive a cyclone
- Available in Western Australia only
- Should not be used within 1 km of salt marine locations, severe industrial or unusually corrosive environments
- Check local council regulations for use in pool areas
- Should not be used around the pool splash zone
- Garden chemicals should not come in contact with fencing
- Bottom rail should be kept clear of debris
Sizes
The nominal heights of fences are 1500 and 1800mm from top rail to bottom rail. The bottom rail should be nominally 50mm above ground level.
Standard panel widths are 2350, 2050 and 1750mm from post to post.
Material Specifications
- ZINCALUME® made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass) (fence panels)
- ZINC HI-TEN® made from zinc alloy coated steel complying with AS1397-2001, G500 (500MPa minimum yield stress), Z275 (275g/m2 minimum coating mass) (posts and rails)
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 4, is made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass) (fence panels), or zinc alloy coated steel complying with AS1397-2001, G500 (500MPa minimum yield stress), Z275 (275g/m2 minimum coating mass) (posts and rails)
- The fence panel base metal thickness is 0.35mm
Product Specifications
