LYSAGHT SMARTASCREEN PLUS® Fencing
by BLUESCOPE LYSAGHT
LYSAGHT SMARTASCREEN PLUS® is the latest addition to the LYSAGHT® range. SMARTASCREEN PLUS® keeps neighbours happy with its stylish appearance on both sides. The innovative panel fencing made of COLORBOND® steel offers clean lines with a unique subtle textured finish. The fence is complemented by an attractive steel lattice panel and ball post caps to create a dramatic finish.
- Posts, rails and panel colours can be mixed and matched for attractive combinations
- Total component system means quick and simple installation
- Gate kits are also available to match. Note: Gates not available in WA
- Low maintenance
- Termite and rot resistant
- May be stepped or raked on sloping ground
- Attractive steel lattice and ball post caps create a dramatic finish
- Should not be used within 1 km of salt marine locations, severe industrial or unusually corrosive environments
- Check local council regulations for use around pool areas
- Should not be used in the pool splash zone
- Garden chemicals should not come in contact with fencing
- Bottom rail should be kept clear of debris
Sizes
The nominal heights of fences are 1500, 1800 and 2100mm from top rail to bottom rail. The bottom rail should be nominally 50mm above ground level.
Standard panel widths are 2350mm from post to post.
Material Specifications
- ZINCALUME® made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass) (fence panels)
- ZINC HI-TEN® made from zinc alloy coated steel complying with AS1397-2001, G500 (500MPa minimum yield stress), Z275 (275g/m2 minimum coating mass) (posts and rails)
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 4, is made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass) (fence panels), or zinc alloy coated steel complying with AS1397-2001, G500 (500MPa minimum yield stress), Z275 (275g/m2 minimum coating mass) (posts and rails)
- The fence panel base metal thickness is 0.35mm
Schematic
Components
